Showing posts with label Easter. Show all posts
Showing posts with label Easter. Show all posts

March 29, 2026

Whimsy Stamps - Easter Bunnies in the Garden

Hello there.  I’m welcoming in spring with a couple of cards courtesy of products from Whimsy Stamos (WS).   First up is an unconventional spring garden scene card using Build-a-Fairy Garden die set with the Bunnies in the Garden stamp set.


The mushroom parts and grass border were die cut from Bristol paper.  The mushroom caps and stalks were ink blended with Victorian Velvet and Brushed Corday distress inks (DI), respectively.  Ink smooshing with diluted Cracked Pistachio DI was used to colour the grass border.  The bunny images onoth cards were then stamped with Memento Tuxedo Black ink on X-Press It paper, coloured with Copic Sketch markers then fussy cut out.  

Copic markers used:
bunny - C00/1/3/4 
eyes - B12 
bunny pinks - R81
overalls - B34/37/39 
ladybug - R27, C4/5/6 
leaf - G05/07/09 


Two A2 size panels were trimmed from Bristol paper next.  Die cut one of them with the Bubbly die to create a frame and ink blended Salvaged Patina DI on the other one for the sky background to peek through.  Tip: leave white areas for clouds.  Stamped the Easter Sentiment with Versafine Onyx Black ink on Bristol paper, heat embossed it with clear glitter embossing powder for some sparkle then fussy cut out.  Assembled the card onto a white card base to finish. 

I had a small mushroom left over, so glued it to the bottom left corner of an envelope to match.  


My next card is a simple Easter scene card featuring the Easter Bunnies stamp set.  The image was done at the same time as the image above. 

Copic markers used:
bunny - W00/1/3/5 
eye - B12 
bunny pinks - R81
basket - E43/44/47 
bow - RV17/19/69 
chicks - Y21/23, YR07/24 
leaves - G03/05//07/09, YG03/06/07/09/63 
flowers - pink: RV10/63/55+Y11//15/17, turquoise: BG02/05, purple: V01/04/15/17 


The Nested Pierced Egg was then used to die cut from a white woodgrain panel.  Stretched the Quick Strips 3 dies to create the cross from white woodgrain paper as well.  Ink blended Sahara Sand dye ink for shading/dimension.


Created a simple background by ink blending Salvaged Patina and Cracked Pistachio DI on Bristol paper for the sky and ground, respectively.  Assembled the card onto a white card base then stamped the sentiment with Versafine Onyx Black ink to finish. 


WS products used for my cards are linked below.  Please note compensated affiliate links are used in this post at no extra cost to you.  Your support is greatly appreciated. Happy new year to those who celebrate.  Thank you for dropping by. 






Challenges:
card 1
Tic Tac Toe - #289 Featured Designer Jeanie (diagonal - Spring, Die Cut/Punch, Coordinating Envelopes)
card 2

March 10, 2026

Spellbinders - Happy Spring

Hello there.  I’m late sharing these Easter cards today, but you know the saying… better late than never. 😀   They feature the Ornate Eggs 3D embossing folder (EFJ), Layered Ornate Eggs stencils and Bunny Buddies dies from Simon Hurley released last month in February by Spellbinders (SB). 


The EF and coordinating stenciks are 5.5x8.5-inches, so two A2 size panels can easily be created in one shot.  Bristol paper was trimmed to size, spritz with water then embossed with the EF,  Coloured the eggs next by ink blending gradient colours of brown dye inks through the stencils,   Chocolate eggs (white, milk, dark and anything in between 😉) inspired the colour palette.  For the darker eggs, a sanding block was used to remove colours from the raised areas.  Next, trimmed the panel down to 1/8” smaller than A2 size and matte it onto espresso cardstock.  Shaded the bunnies with grey dye ink for dim3nsion.  Die cut the bunnies and sentiment from white, pink, espresso and gold foil cardstock then assembled the card onto a white card base to finish. 


Rather than letting all the extra pieces from the first card go to waste or collect dust, some were used to create this.

The two eggs behind the bunny were fussy cut out from the second dry embossed egg panel. 



Used the Arches dies to die cut a vellum background and a frame then assembled the card onto a white card base to finish   

SB products used on these cards are linked below (simply click on the images).  Please note, compensated affiliate links have been used throughout this post and blog at no extra cost to you.  I appreciate your support.  Thank you for stopping by. 






Challenges:

April 19, 2025

Whimsy Stamps - Easter Bunny and Egg

Hello there  I’m back today with a fun easter card made with dies from Whimsy Stamps (WS).

Stretched the Bunny Butt die to create a front-facing bunny sitting among some easter eggs.  The butt piece worked for the head, don’t you think?. 😂   The Quick Strips die set was used for the ears and paws.  Partial die cutting was done to “shrink” the ovals for the inner pink ear layer.  For shading, ink blended with Lost Shadow or Victorian Velvet distress inks (DI). 


The easter eggs were die cut from white paper and ink blended with DI in a rainbow colour palette.  The stripes were achieved with masking while the spots on the medium size aqua egg were stencilled over the Dotty stencil.  “Easter” from Happy Sayings stamp set was white heat embossed on the egg and “happy” was fussy cut out from the coordinating scallop circle die.  The lattice background was die cut twice from Bristol to stack for dimension.  Assembled the card onto a white card base and drew in the eyes and paws with a black pen to finish. 


WS products used for my card are linked below.  Please note, affiliate links were used in my post when possible at no extra cost to you.  I appreciate your support.  Happy easter to all who celebrate.  Thank you for stopping by. 






*products may also be available at Simon Says Stamp*

Challenges:

April 17, 2025

Whimsy Stamps - Easter Bunnies

Hello every-bunny. 😉   It’s been a hot minute since I posted, but I have a couple of Easter cards to share today featuring the Easter Bunnies stamp set from Whimsy Stamps (WS).  First up is a super easy CAS (clean and simple) card using a sketch.


Stamped the image and sentiment with Memento Tuxedo Black ink on  an A2 size X-Press It paper panel then coloured with Copic Sketch markers.  Normally, I would list the markers used, but there were a lot and I don’t remember exactly which ones. 😝


Adhered the panel onto a white card base then “decorated” the eggs with a white gel pen to finish
.
My second card was pretty easy as well.  I just stepped it up a bit wit die cuts. 


Once again, the image was stamped with Memento Tuxedo Black ink on X-Press It paper and coloured with Copic Sketch markers.  Stamped the image again onto NoFuss masking paper and fussy cut out a mask for the image before ink blending Twisted Citron/Evergreen Bough distress inks (DI) for the ground and Tumbled Glass DI for the sky.  Die cut out with the Spring Ovals die set.


Die cut the white frame twice from white and once from white woodgrain papers to stack for  dimension.  The scallop layer was die cut from light plum cardstock.


White heat embossed the sentiment onto black cardstock and cut out with a slanted Quick Strips die.  Adhered the negative oval woodgrain panel onto a white card base then assembled the card in top to finish.  






Challenges:

card 1