Showing posts with label ink blending. Show all posts
Showing posts with label ink blending. Show all posts

October 30, 2026

Whimsy Stamps - Halloween Scarecrow

Hello everyone. Today I have a twofer for you featuring the Halloween Scarecrow die from Whimsy Stamps (WS).  It's my final Halloween card of the season and my first ever dark gothic Christmas card.  First up is my Halloween card. 


The scarecrow is just slightly longer than 5" ", so this is an A7 (5"x7") size card.  To start, a moon mask was die cut from NoFuss masking sheet with the largest Pierced and Stitched Circles die.  Adhered the mask to an A7 size Bristol panel then ink blended Mustard Seed, Wild Honey, Rusty Hinge and Black Soot distress inks (DI) with blending brushes for the night sky.  Splattered it with diluted black gouache paint for a bit of texture. Removed the mask and added colour to the moon with ink remaining on the Mustard Seed and Wild Honey brushes. 


The scarecrow, "Night" word from Scary Night, ghosts from Boo and tombstone/skull from Dracula's Coffin were all die cut from white and ink blended/shaded with Black Soot DI.  The scarecrow and "Night" word were die cut from X-Press It paper to offset for a drop shadow.  The head/hat was fussy cut out and coloured with Copic Sketch markers.


The grass layers were die cut from dark gray cardstock with the Grass and Cloud Edger dies then ink blended with Black Soot DI as well.  The fence from Rail and Fences was die cut from black.  Assembled the card onto a white card base then stamped accents/details (bats, cat, spider, etc.) from Halloween Postage with Versafine Onyx Black ink to finish.


Next up is my dark gothic Christmas card.  This is completely outside of my wheel house, but the prompt at Christmas Kickstart this month made me do it! 😜   With Halloween over, Mr. Scarecrow is dressed to the nines in his tuxedo and ready for Christmas! 😂 


Mr. Scarecrow and bat from Batty were die cut from black.  Fussy cut/modified Mr. Scarecrow down.  X-Press It paper was used for all the whites.  The skull/crossbones (bowtie) are from Dracula's Coffin and the bat eyes, of course, are from Batty.  Stamped the hat from Christmas Doggies and candy cane from Santa's Magic with Memento Tuxedo Black ink.  Fussy cut the back pieces to go behind the skull and tuxedo shirt, then coloured them all with Copic Sketch markers. 

Copic markers used:
reds - R14/27/39 
black(eyes) - C9 
gray(nose) - C5 
whites/shading - C00/1/2  


The background is red cardstock ink blended with Lumberjack Plaid and Black Soot DI to give it a dark deep red wine colour.  The sentiment from Sentiment Assortment - Merry Christmas was heat embossed with gold embossing powder.  Assemble the card onto a white card base to finish.  Wish I had a wine or martini glass to put in his left hand. 🤷🏻‍♀️ 


WS products used are linked below.  Please note compensated affiliate product links have been used in this post when possible at no extra cost to you should you decide to make a purchase through them. Your support is appreciated.  Thank you for stopping by. 





October 21, 2026

Whimsy Stamps - Pink Christmas for the Cure


Hello everyone.  October is Breast Cancer Awareness Month and Jingle Belles hosts a fundraiser annually for the Cure.  Every card linked to their gallery, Stephanie and Lauren will each donate $2... that's $4 per card! Time got away from me, but I was determined to contribute.  I'm pleased to say that I managed to complete two! 

Products used for both cards are from Whimsy Stamps (WS).  Images were stamped with Memento Tuxedo Black ink on XPress It paper, coloured with Copic Sketch markers then fussy cut out.   Sentiments are from Sentiment Assortment - Merry Christmas stamp set. 


My first card features the bunny from Christmas in the Woods stamp set.  Copic markers used to colour her were:

body - W00/1/3   
eyes - B12
accessories - RV10/13/17  


The Extreme Postage, birch trees from Forest Majesty and a blank panel slightly smaller than the postage were die cut from Bristol paper.  Ink blended the birch trees and blank panel with gray and Pinklicious fresh dye inks, respectively.  Stamped the sentiment in black. Assembled the card onto a pink snowflake pattern paper from Blurry Flurries then adhered to a white card base to finish. 


My second card features the Christmas Greetings Fairies stamp set.  Copic markers used to colour her were:

pinks - RV10/63/55/66   
greens - YG21/23/25   
skin - E00/02/13  
hat pom-pom/brim - N0/1/3 


The Twinkle Swirl cover plate was die cut from Bristol and ink blended with pink dye ink around the edges and fading in.  Glued it to a pastel pink glitter panel for some sparkle.  Stamoed the sentiment with Razzkeberry fresh dye ink then assembled the card onto a white card base to finish. 


WS products used are linked below.  Please note compensated affiliate product links have been used in this post when possible at no extra cost to you should you decide to make a purchase through them. Your support is appreciated.  Thank you for stopping by. 






*products may also be available at Simon Says Stamp or Scrapbook.com*
Challenges: 
Double D - Wings (card 2 - fairy)

October 19, 2026

Whimsy Stamps - Wanted: Scaredy Bat

Hello everyone.  I have another fun fall/halloween card today featuring the third image from the Cutie Batootie stamp set by Whimsy Stamps (WS).  


A Menento Tuxedo Black marker was used to make it easier to ink up and exclude parts of images.  Started by inking the bat's head and stamping onto XPress It paper.  Masked it with its coordinating NoFuss mask, then stamped the Wanted Poster next excluding the rewards portion at the bottom.  Masked around the quadrilateral frame and ink blended Wilted Violet and Black Soot distress inks (DI) within the frame and around the panel edges.  Coloured the image with Copic Sketch markers. 

Copic markers used:
bat - BV20/25/29   
ears - E02 
pumpkins - YR02/04/07/09, E02
stem - YG63/67 



Masking directly on the sentiment stamps was done to create the custom sentiment. Scaredy cat from Wicked Cute matched "for being" from Wanted Poster perfectly.  Die cut the webs from white using the Spiders and Webs web dies then assembled the card onto a white card base to finish.  


WS products used are linked below.  Please note compensated affiliate product links have been used in this post when possible at no extra cost to you should you decide to make a purchase through them. Your support is appreciated.  Thank you for stopping by. 






*products may also be available at Simon Says Stamp or Scrapbook.com*

Challenges:
Festive Friday - #220 Halloween (orange, black, die cuts, spider's web, bat) 

October 14, 2026

Whimsy Stamps - Autumn Pumpkin Rocker

Hello there. Popping in quickly to share a cute interactive  card featuring the Build-a-Pumpkin Patch die set from Whimsy Stamps (WS).

The Canadian Thanksgiving holiday was two days ago on Monday.  This was supposed to be a thanksgiving card for it, but my due set went missing.  Murphy's Law, I didn't find it (actually a friend found it) until it was too late. So I pivoted and created this fun rocker rocker card. 


The pumpkin and leaves were die cut from XPress It and mixed media papers, respectively.  Coloured the pumpkin with Coouc Sketch markers and ink blended the leaves with distress inks (DI).  Drew in leaf veins with Copic Sketch markers as well.  Lightly splattered the leaves with diluted black gouache paint for a bit of texture. 

Copic markers used:
pumpkin - Y17/38, YR02/04/07, E07/18 
stem - YG61/63/67, R14 
DI used:
Fossilized Amber, Wild Honey, Carved Pumpkin, Rusty Hunge, Barn Diir, Lumberjack Okaid


Used the largest and third largest Pierced and Stitched Circles dies to die cut from heavy weight white cardstock and white woodgrain paper, respectively. Folded the largest circle in half to create the rocker base.  Partial die cut the brown gingham paper from the Mix n Match Neutrals paper pack with the largest circle to cover the front.  The Autumn sentiment was die cut from gold foil paper and its shadow from dark brown espresso cardstock.  Gave the pumpkin some personality and used the eye die from Shark Snacks for the eyes and cheeks.  Dotted the eyes with a white gelly roll pen and used the negative cutout to trace in the smile with a fine black pen.  Assembled the card to finish.  This will fit into an A7 (5"x7") size envelope since the finished size is 5" wide by just under 6" high. 

Blogger will not allow video uploads on my blog, but you can see it rock over on my IG post HERE. 


WS products used are linked below.  Please note compensated affiliate product links have been used in this post when possible at no extra cost to you should you make a purchase through them. Your support is much appreciated.  Thank you for stopping by. 






*products may also be available at Simon Says Stamp or Scrapbook.com* 
Challenges:
Time Out - #323 Pick Two (circle, gingham, harvest) 
Tic Tac Toe - #303 Featured Designer Kerry (diagonal down R - Fall Colors, Leaves, Metallics)