Showing posts with label Guest Design. Show all posts
Showing posts with label Guest Design. Show all posts

January 02, 2021

Guest Designer for Addicted to CAS Challenge #188 - Emboss

 


Happy new year everyone! Hope you all had a wonderful Christmas and Santa was good to you.  For my first blog post of the year, I’m excited to be guest designing (GD) at Addicted to CAS (ATCAS) for their challenge #188 - Emboss.  


I needed a belated birthday card for a friend.  The BB Holiday Penguins stamp set from My Favorite Things (MFT) was sitting out on my desk, so I decided to stretch it to create this.


The penguin was stamped with Memento Tuxedo Black ink on X-Press It cardstock and coloured in with Copic Sketch markers (BG10, BG13, BG49, YR00, YR16, E08, C00, C1, C3, C9), then die cut out with the coordinating die.  


The MFT Impact letters were die cut from scraps of X-Press It cardstock and ombre coloured with the same BG markers listed above.  Inked them with VersaMark and heat embossed them with clear glitter embossing powder for lots of sparkle.  The sentiment from MFT Bitty Birthday Wishes was white heat embossed on a black cardstock strip.  Adhered an A2 stitched Bristol panel from my stash onto a white card base and assembled the card to finish.  


Check out the challenge blog post HERE for more inspirations from the design team, then join in the fun!  Before I go I want to thank Kylie and the ATCAS team for the GD opportunity.  Cheers to a better 2021 (it shouldn’t be too hard 😆).  Have a wonderful weekend.








Challenges:
Watercooler Wednesday - #302 Marsha’s Special 3-Week Anything Goes 

July 24, 2020

Guest Designer for Just Us Girls Challenge #546 - Photo Week: Amusement Ride


Hello there.  I’m back with my final post as guest designer this month at Just Us Girls (JUGS).  It’s their photo week challenge #546 and here’s the photo.

 

I must admit I struggled with this one because I didn’t have anything amusement park related.  Even the muted colours stumped me. 😂   But then I noticed the French flag flapping away in the upper left corner and the trees / homes below and this is my card.


All stamping was done with Memento Tuxedo Black ink on X-Press It cardstock.  Started by stamping the air balloon from My Favorite Things Up in the Air.  Inspired by the flag, coloured it with Copic markers then die cut out with the matching die.


Masking was then used to create the little neighbourhood with new NBUS Concord and 9 City Stacks stamp set on a stitched panel from my stash and coloured in with Copic markers as well.  Blended SU! Smoky Slate dye ink over a cloud edge stencil from Honey Bee Stamps for the sky.  Black heat embossed the sentiment from Poppy Stamps Birthday Blowout stamp set.  Adhered the panel to a white card base then popped up the air balloon with mounting tape to finish.


A big THANK YOU to Vicki and the wonderful JUGS team for having me guest design this month!   The challenges were so much fun and I was so honoured.  Hope you will join us this week with your take on the photo.  If you need more inspiration, you can check out what the talented JUGS team created over on the challenge blog HERE.  Thank you for dropping by.  Have a great weekend.










Challenges:
Watercooler Wednesday - # 281 Heidi’s All About Ocassions.
NBUS #16 - new unused stamp set

July 17, 2020

Guest Designer for Just Us Girls Challenge #545 - Colour Week: Mustard, Teal, Light Grey

Hello there.  I’m back for the third week as guest designer at Just Us Girls (JUGS).  It’s Color Week challenge #545 using colours Mustard, Teal and Light Grey.


I almost went the floral route, but then thought one of the adorable pups in the Christmas Puppies stamp set from Gerda Steiner Designs would fit the bill and created this.


I kept it clean and simple (CAS) this time.  Stamped the puppy with Memento Tuxedo Black ink on a scrap of X-Press It cardstock.  Coloured it in the colours of the challenge with Copic Sketch markers, then die cut it out with the matching die.  Die cut two more times from regular thick cardstock and stacked for dimension.


Took a stitched Bristol panel from my stash next and blended SU!’s Smoky Slate dye ink with a blender brush over an English Brick stencil from My Favorite Things.  Black heat embossed the sentiment from Gerda Steiner Designs Moody Unicorns then mounted the panel with fun foam on a white card base to finish.


If you need more inspirations before playing along, head on over to the challenge post HERE and check out what the wonderful design team has created.  Hope to see you in the gallery.  Thank you for joining me today.










Challenges:
Crafty Animals - #40 Anything Goes Animals
Gerda Steiner Designs - July Share Your Designs
Send a Smile 4 Kids - Christmas in July 4 Kids or Anything Goes 4 Kids
Watercooler Wednesday - #280 Kath’s Anything Goes with a Masculine Twist
Cardz 4 Guyz - #249 No Patterned Paper
SSS Wednesday Challenge - For a Child
Stamping Sensations - July All Creatures Great and Small
The Sisterhood of Crafters - Ink It Up

July 10, 2020

Guest Designer for Just Us Girls Challenge #544 - Trend Week: Slimline


Hello there.  I’m back for another week as guest designer at Just Us Girls (JUGS) for their Trend Week challenge #544 Long and Skinny.


Of course, immediately the popular “long and skinny“ slimline card style jumped to mind and for bonus points, I used the Skinny Upper Alphabet dies from The Stamp Market, too. 😂   Combined them with new NBUS slimline stitch dies from Trinity Stamps and new NBUS Tons of Fun stamp set from SugarPea Designs (SPD) to create this.


Started by stamping the elephant on the left with Memento Tuxedo Black ink on a scrap of X-Press It cardstock.  Used the reverse image stamping technique to create the facing elephant on the right.  Here’s a video tutorial from Jennifer McGuire showing how.  Coloured with Copic Sketch markers then fussy cut them out.


Next, the slimline stitched panel was die cut from Bristol paper.  Seedless Preserves and Spun Sugar distress oxide inks (DOx) were blended on with blender brushes for the background.  Spritz with water and blot with a paper towel to give it texture.


Repeated the blending / spritzing on a scrap of Bristol paper before die cutting each letter three times from it and stacking them for dimension.  A little disclaimer... so bummed I lost the letter “P” 😢 so I ended up modifying the letter ‘R” to resolve this situation.  Can you tell? 😂   The sentiment from the same set was white heat embossed on a scrap of black cardstock.  Assembled the card onto a 8.5”x3.5” white card base.  Doodled in the stars and dots with a white gel pen and added clear shimmer on the letters to finish.


My second slimline card ever and it was so much fun.  Come and join us this week with your take on long and skinny.  For more inspirations from the wonderful JUGS team, click HERE.   Can’t wait to see what you come up with.  Thank you for dropping by.  Enjoy your weekend.









Challenges:
Crafty Animals - #40 Anything Goes Animals
Mix It Up - #39 Anything Goes + optional open technique (reverse image stamping technique)
The Sisterhood of Crafters - Ink It Up
Watercooler Wednesday - #279 Helen’s All About Occasions
Pixie’s Snippets Playground - #381 Use snippets
NBUS #16 - new stamp and slimline die

July 03, 2020

Guest Designer for Just Us Girls Challenge #543 - Word Week: Rainbow


Hello there.  I’m so excited to be back as a guest designer at Just Us Girls (JUGS) for the month of July!  Thank you JUGS team!  The first challenge is word week and the word is Rainbow!


Those who know me know I love rainbow anything!  And after not being able to join in the Circles/Bubbles challenge at Twofer Challenge last month due to back issues again, I was thrilled to create one of the cards I had envisioned!  I used new NBUS Interlocking Circles die with an older Blow Me Away stamp set from SugarPea Designs for some rainbow bubble fun! 


Started by die cutting from X-Press It cardstock with the pierced rectangle die from SugarPea Designs Card Front Element Builder II.  Stamped the dragon in the bottom left corner with Memento Tuxedo Black ink, masked him then stamped the bubble wand in his hand.  To ground him, pounced Memento Tuxedo Black ink with a sponge dauber through a diagonal stripe stencil (discontinued) then black heat embossed the sentiment from the same stamp set.  Removed the mask and coloured in with Copic markers.


For the bubbles, the Interlocking Circles was die cut from the panel and twice from Bristol paper then stacked for dimension.  Took a piece of Bristol paper next and ink blended Squeezed Lemonade, Picked Raspberry, Mermaid Lagoon and Twisted Citron distress inks to create my rainbow.  Spritzed it with a sparkle spray, but then decided to use acetate to get a better “translucent bubble” look instead.  A piece of acetate backed the opening.  Adhered the inked rainbow piece directly to the card base then added the panel on top.  Inlaid the stacked Interlocking Circles to finish.


Now it’s your turn to show off your rainbow creations and join in the fun!  More inspirations from the design team can be seen HERE.  Happy 4th of July to my American neighbours to the south.  Thank you for stopping by.  Enjoy your weekend.









Challenges:
Crafty Animals - #40 July Anything Goes Animals
The Male Room - #139 Use Die Cuts
Seize the Birthday - #194 Anything Birthday Goes optional Red White and Blue (no twisting)
The Sisterhood of Crafters - Stencilling
Love to Craft - #48 July Anything Goes

June 24, 2020

Christmas Craft Creations June Reminder - Christmas Trees


Hello everyone.   I’m popping in with the reminder post as guest designer for the Christmas Trees challenge at Christmas Craft Creations (CCC).

With Christmas Trees as the theme, I had to use the O Christmas Tree stamp set from Hello Bluebird to create this fun critter scene card.


Started by stamping all the images with Memento Tuxedo Black ink on X-Press It cardstock.  Coloured them with Copic markers and die cut out with the matching dies.


Next, turquoise dye ink was blended with a blender brush over hand cut hill masks onto a Bristol stitched rectangle panel to create the background.  The sentiment from Poppy Stamps (new unused gift from a friend) was stamped with Versafine Black ink and heat embossed with clear embossing powder.  Assembled the card onto a white card base and added a light flurry of snow with a white gel pen to finish.


That was a fun one.  I want to thank Charlotte and the CCC team for having me guest this month.  To see what they have created to inspire you to play along in the challenge, click HERE.  Thank you for joining me.  Have a wonderful day.









Challenges:
Merry Little Christmas - #23 June Anything Christmas Goes
Alphabet Challenge - F for Flora or Fauna
Crafty Animals - #39 Anything animals Goes

June 10, 2020

Guest Designer for Christmas Craft Creations - June Challenge Christmas Trees


Hello everyone.  I’m excited to be the first guest designer for the new Christmas Craft Creations monthly challenge.  This month’s theme is Christmas Trees.

I’m currently focusing on using new unused (NBUS) products and pulled out the Quirky Christmas Trees stamp set from Avery Elle that has already been discontinued 🙈 and the Skinny Upper Alpha dies from The Stamp Market to create this.



The tree stamp was inked with Caribbean Sky and Persian Blue dye inks from Altenew and stamped onto Whisper White cardstock then die cut out with the matching die.  The letters were each die cut three times from Bristol paper and stacked for dimension.


Wishes from Hero Arts Color Layering Christmas Tree was stamped with Persian Blue ink on Bristol then die cut out with a fishtail banner (no linger available).  Punched a hole and added white baker’s twine to turn it into a tag.  Took a stitched navy panel from my stash and splattered with white gouache paint for a snowy background.  Assembled the card onto a white card base and added clear shimmer on the tree to finish.


There are so many Christmas greeting possibilities containing the letter “A”, so I made a second card while I had my supplies out.


Ready to play along?  For more inspirations from the design team click HERE.  Hope to see you in the gallery.  Thank you for dropping by.









Challenges:




June 03, 2020

Guest Designer for Time Out Challenge #163 - Inspired by Words


Hello there.  I’m excited to be back guest designing at Time Out for their challenge #163 Inspired by Words.


Grateful and blossom stood out to me.  And since STAMPlorations is sponsoring the challenge, I used a new unused (NBUS) stamp from them called Blossom Sprays #1 to create this thank you card.


The image was stamped on X-Press It cardstock with Memento Tuxedo Black ink and coloured with Copic markers and Polychromos pencils.  Clear shimmer on the flowers for some sparkle and white dot details were added before fussy cutting it out.


For the background, took a kraft panel from my stash and blended kraft ink over an English Brick Wall stencil from My Favorite Things.  Purposely applied the ink unevenly and added black splatters to give it textured and rustic look.  The sentiment (freebie from closed down Winnie and Walter) was die cut from white shimmer and black cardstock and offset for a shadow effect.  Die cut the NBUS Memory Box Bubble Circle from Bristol paper then assembled the card onto a white card base to finish.


For more inspirations from the design team, check out the challenge post HERE.  I want to thank Sandie and the TO team for having me guest.  Hope to see your cards in the gallery.  Enjoy your day.








Challenges:
STAMPlorations - Anything Goes
STAMPlorations - June Stencil Anything Goes
Watercooler Wednesday - #274  Dawn’s Anything Goes with a Feminine Twist
Uniko - #59 Anything Goes optional twist Bright and Happy
NBUS #15 - new stamp and Bubble Circle die